|
|
Esmet Model 67 Electroline Oil Field Water Well Drilling Swivel
|
|
There are three styles available
(S) Steel with Cadmium Plated.
(SS) Stainless Steel
(SSP) Stainless Steel and Pressure Compensating (for
deep sea water applications) The Esmet Swivels are commonly
use by Oil Field Drilling Plateforms and Water Well Drilling
Trucks. |
|
|
The Electroline Esmet Sealed working Swivel has matched
sets of 2 or more flush ground angular contact ball bearings
that are permanently lubricated with high pressure grease
and sealed at the factory. |
|
|
|
|
|
Model
67 Clevis to Clevis Bullet Style Drilling Swivel
6000 Series Gold Band Swivel Zinc Plated Alloy Steel
|
Esmet 6000 Series
Model 67
Drilling Swivel |
|
|
|
Model |
S.W.L
3:1
5:1
|
Rope
Size |
Weight |
Price ($) |
Add to Cart |
|
1,380 lbs
2,300 lbs
|
1/8" |
0.3 lbs |
$ 171.00 |
|
|
3,000 lbs
5,000 lbs
|
1/4" |
1.0 lbs |
$ 285.00 |
|
|
4,800 lbs
8,000 lbs
|
3/8" |
1.6 lbs |
$ 388.00 |
|
|
6,900 lba
11,500 lbs
|
1/2" |
3.2 lbs |
$ 423.00 |
|
|
11,100 lbs
18,500 lbs
|
5/8" |
8.1 lbs |
$ 612.00 |
|
|
18,900 lbs
31,500 lbs
|
3/4" |
10.1 lbs |
$ 794.00 |
|
|
18,900 lbs
31,500 lbs
|
3/4" |
10.1 lbs |
$ 818.00 |
|
|
20,000 lbs
33,333 lbs
|
7/8" |
31 lbs |
$ 1346.00 |
|
|
30,000 lbs
50,000 lbs
|
1" |
32 lbs |
$ 1875.00 |
|
|
50,000 lbs
83,333 lbs
|
1-1/4" |
90 lbs |
|
Call to Order |
|
70,000 lbs
116,667 lbs
|
1-1/2" |
115 lbs |
|
Call to Order |
|
|
Prices and Tariffs are subject to change without notice
Current Availability Subject to Prior Sales
Minimum Order U.S.A. and Canada: $150 (US)
Minimum Order International: $250 (US)
Extended Lead Times May Apply
Terms and Conditions: |
|
|
Table
of Dimensions |
Model |
S.W.L.
Tons |
Rope
Size |
Wide |
Pin
Size |
Jaw
Size |
Weight
lbs |
- |
- |
- |
A |
C |
D |
- |
6712 |
.5 |
1/8" |
7/8 |
5/16 |
5/16 |
0.3 |
6725 |
.75 |
1/4" |
1-1/4 |
3/8 |
19/32 |
1.0 |
6737 |
1.5 |
3/8" |
1-1/2 |
1/16 |
19/32 |
1.6 |
6750 |
3.0 |
1/2" |
1-7/8 |
5/8 |
3/4 |
3.2 |
6762 |
5.0 |
5/8" |
2-7/16 |
7/8 |
1 |
8.1 |
6775 |
8.5 |
3/4" |
2-7/8 |
1-9/32 |
1-1/4 |
10.1 |
6781 |
8.5 |
3/4" |
2-7/8 |
1-1/8 |
1-9/16 |
10.1 |
6787 |
10 |
7/8" |
3-5/8 |
1-1/2 |
1-3/4 |
31.0 |
6799 |
15 |
1" |
3-5/8 |
1-1/2 |
1-3/4 |
32.0 |
67150 |
35 |
1-1/2" |
5-3/8 |
2 |
2 |
65.0 |
|
|
| |
Esmet Model 67 Drilling Swivels are fittings
are all furnished in cadmium plated steel. Also available
in stainless steel and pressure compensating models for deep
sea water applications.
|
Procedures
for Use and Inspection for Electroline Esmet Sealed Swivels |
Loads
should never exceed the safe working loads (S.W.L.) shown. Any
shock load, overload, or side load beyond the S.W.L. can damage
or deform the swivel, in which case the manufacture warranty
is void under these conditions.
Swivels should be inspected regularly for signs of damage due
to overloading, a condition identified by spinning the swivel
by hand. If the motion is rough or has a ratchet like
effect, the bearings have been damaged and should be replaced.
Side loading can occur if the swivel is improperly used as
part of a sling or when it is pulled over a sheave while loaded. Damage
is indicated when the swivel turns freely in one spot and locks
in another, or by inspecting the gap between the barrel and
shank. If the gap is wide on one side and closed on the
opposite, there is damage.
Swivels showing signs of failure should be returned to the
Esmet factory with a detailed history of the unit - use
of swivel, how employed, loads imposed, length of service,
etc.
|
|
|
|
|
|
Privacy Notice • Copyright • Terms • Contact Us • Product Warnings
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Prices and Current Stocking Status subject to change without notice.
Factory Direct Minimum order applies.
Minimum Order U.S.A. and Canada: $150 (US)
Minimum Order International: $250 (US)
Terms and Conditions Privacy Notice
|
|
|
|
|
|
